Skip to Content

AVR - Automatic Voltage Regulator GB-130

https://www.bochipower.cc/web/image/product.template/937/image_1920?unique=9b4d277
(0 review)
The GB-130 Voltage Regulator is a robust solution designed for precise control in generators. Its sensing input accepts U, V, W voltages at 50/60 Hz, while the power input (S1, S2, S3, S4) operates with AC voltages and a frequency of 150 to 180 Hz in a 2 -phase configuration. It stands out for its ability to handle a maximum excitation current of 40A and offers a steady-state voltage regulation rate of less than 1.5%, ensuring reliable and efficient regulation.

$ 94.35 94.35 USD Tax Excluded

94.35 Bs Tax Excluded

  • Model
  • Generator Parts
  • Applicable To
  • Weight
  • Dimensions

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

AVR - GB-130 belongs to the generator excitation circuit and holds the output voltage within about ±1 % when the load steps up or down.

AVR wear is thermal. It works inside the generator compartment with no ventilation of its own, so it is usually the first module to age on a high-hour set. Keeping one on the shelf avoids a multi-day stop for a low-cost part.

Specifications and compatibility

Applicable to
ESCOBILLA
Dimensions
17 x 8,5 x 13 cm
Weight
1.00 kg

How to verify before ordering

  • Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
  • Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
  • Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.

Frequently asked questions

How do I know the fault is the AVR and not the generator?

Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.

Can the voltage be trimmed after installation?

Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Characteristics
Model GB-130
Applicable To Carbon brush
Weight 1,00 kg
Dimensions 17 x 8,5 x 13 cm
Spare Parts
Generator Parts AVR