Rectifier bridge - Universal rectifier bridge M50100THA1600
The M50100THA1600 is a robust three-phase bridge rectifier module with common-anode diode configuration, designed for high-current applications. Offers an impressive forward current capacity of 100A per diode and a reverse voltage rating of up to 1600V (1.6kV). Operates with a maximum forward voltage of 100A to 1.2V and has a standard recovery time greater than 500ns. This module is manufactured for chassis mounting, which gives it great robustness and facilitates its integration into existing systems. Its design ensures high reliability and a long service life at operating temperatures from -40°C to 125°C. In addition, it is a lead-free component that complies with the RoHS directive, making it ideal for power supplies, inverters, converters and other high-power electronic circuits.
Universal bridge rectifier M50100THA1600 is an auxiliary electrical part: part of the set wiring, protection or indication.
Before replacing, measure continuity and voltage under load. A terminal that shows continuity at no load can drop completely once current flows, and that is the case that wastes the most time.
Specifications and compatibility
- Amperage
- 100 A
- Dimensions
- 8,5 x 5,5 x 9 cm
- Weight
- 0.50 kg
How to verify before ordering
- Match voltage, current and conductor cross-section to what the circuit demands.
- Check the connection type (screw, spring, crimp) and terminal gauge.
- Confirm the IP rating if the part sits in an exposed area of the panel.
Frequently asked questions
Why does a terminal get hot?
Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.
Can I fit a relay with a higher amp rating?
You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.
Related parts
- Rectifier bridge - Universal rectifier bridge KBPC50-10
- Rectifier bridge - Universal rectifier bridge M50100THC1600
- Rectifier bridge - Universal rectifier bridge MDS100-12
- Rectifier bridge - Universal rectifier bridge MDS60-12/16
- Rectifier bridge - Universal rectifier bridge SQL100A 1600V
See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.
Specifications
| Characteristics | |
|---|---|
| Model | M50100THA1600 |
| Amperage (A) | 100 A |
| Weight | 0,50 kg |
| Dimensions | 8500*5500*9000 mm |
| Spare Parts | |
|---|---|
| Generator Parts | Rectifier bridge assembly |
