Skip to Content

Rectifier bridge - Universal rectifier bridge MDS100-12

https://www.bochipower.cc/web/image/product.template/2473/image_1920?unique=9b4d277
(0 review)

The MDS 100-12 is a three-phase rectifier bridge module designed for high-current applications. This robust component withstands a maximum reverse voltage of 1.2kV and a conductive current of 100A, with a maximum surge current capacity of 1.2kA. Its screw-terminal module design makes both electrical and mechanical mounting easy, ensuring a secure connection. In addition, it features a maximum conducting current of 1.3V and has M6 screws at its output for a simple and reliable connection.

$ 27.08 27.08 USD $ 38.68 Tax Excluded

34.44 Bs Tax Excluded

  • Model
  • Generator Parts
  • Amperage (A)
  • Weight
  • Dimensions

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

Universal bridge rectifier MDS100-12 is an auxiliary electrical part: part of the set wiring, protection or indication.

Before replacing, measure continuity and voltage under load. A terminal that shows continuity at no load can drop completely once current flows, and that is the case that wastes the most time.

Specifications and compatibility

Amperage
100 A
Dimensions
8,5 x 5,5 x 9 cm
Weight
0.50 kg

How to verify before ordering

  • Match voltage, current and conductor cross-section to what the circuit demands.
  • Check the connection type (screw, spring, crimp) and terminal gauge.
  • Confirm the IP rating if the part sits in an exposed area of the panel.

Frequently asked questions

Why does a terminal get hot?

Contact resistance: too little clamping area or a bad crimp. The heat oxidises the joint and worsens it until the circuit opens.

Can I fit a relay with a higher amp rating?

You can, and it is often good practice, provided coil voltage and contact arrangement match. Never fit one with a lower rating.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Characteristics
Model MDS100-12
Amperage (A) 100 A
Weight 0,50 kg
Dimensions 8500*5500*9000 mm
Spare Parts
Generator Parts Rectifier bridge assembly