Skip to Content

AVR - Automatic Voltage Regulator DVR2000E

https://www.bochipower.cc/web/image/product.template/3137/image_1920?unique=0d929d3
(0 review)

The DVR2000E is a solid-state electronic voltage regulator, microprocessor-based, which controls the voltage output of brushless AC generators by adjusting the exciter field current. It is powered by a high-frequency, multi-pole permanent magnet generator (PMG). This AVR comes in an encapsulated package for behind-the-panel mounting, screwed to its plastic housing, and includes LED indicators that show generator and system status. Connections are made via quarter-inch quick-connect terminals on the rear panel, which also hosts a DB-9 9 -pin connector for PC communication. To comply with UL DVR2000E and prevent accidental contact with live terminals and heat sinks, the 509 is supplied with a moulded cover that must always be installed when power is applied.

$ 1,093.64 1093.64 USD Tax Excluded

1,093.64 Bs Tax Excluded

  • Model
  • Generator Parts
  • Applicable To
  • Weight
  • Dimensions

This combination does not exist.

Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

AVR - DVR2000E belongs to the generator excitation circuit and holds the output voltage within about ±1 % when the load steps up or down.

AVR wear is thermal. It works inside the generator compartment with no ventilation of its own, so it is usually the first module to age on a high-hour set. Keeping one on the shelf avoids a multi-day stop for a low-cost part.

Specifications and compatibility

Applicable to
MARATHON ELECTRIC
Dimensions
25 x 6 x 13 cm
Weight
2.00 kg

How to verify before ordering

  • Check that the reference printed on the AVR label (for example AS440, MX341, R120) matches exactly; variants differ in sensing range and excitation level.
  • Confirm the excitation input voltage and the generator type it serves. They are not interchangeable across generator makes or speed ranges.
  • Inspect wiring and brushes before replacing the module: a loose connection produces exactly the same symptoms as a burnt AVR.

Frequently asked questions

How do I know the fault is the AVR and not the generator?

Measure output voltage at steady load. If it is low and does not respond to the excitation trim, while windings and rotating diodes are healthy, the AVR is the suspect. A cross-test with a spare AVR confirms it in minutes.

Can the voltage be trimmed after installation?

Yes. Most of these regulators have a voltage and a stability trim pot. Set them at no load to the site nominal voltage, then verify under load before signing off.

Related parts

See the spare parts catalogue or request a quotation quoting the equipment reference. Third-party trademarks are cited for identification purposes only.

Specifications

Characteristics
Applicable To BASLER ELECTRIC, MARATHON ELECTRIC
Model DVR2000E
Weight 2,00 kg
Dimensions 25 x 6 x 13 cm
Spare Parts
Generator Parts AVR